Master Bedroom Board and Batten (in which I learn how to wield a nail gun)

The world of power tools is not safe from me anymore. Or perhaps I am no longer safe from the world of power tools?

Either way, I now feel basically invincible.

I used a nail gun.

BOOM.

Let me tell you the full story.

If you have been following along, you’ll know that we’re renovating Mom and Dad’s bedroom at the old homestead. Here‘s where we started from (the brownish butterfly wallpaper had to go), and here‘s where what it looked like after we painted the ceiling a dark gray-brown color. We also painted the walls above the planned board and batten treatment a lighter shade of the ceiling color, which you’ll soon see.

Next on our list was board and batten. This wasn’t on our original list, but Mom and I conjectured that their antique dark wood bedroom furniture would be the star of the show against some crisp white board and batten, so we went for it.

Dad used pre-primed MDF strips for the boards, and as he cut them to size, Kenny and I worked together (shocker, I know!) to spread caulk on the back of the boards and nail them in place. With, of course, the nail gun.

The caulking was actually a nifty tip Dad suggested: since the walls are plaster (as opposed to drywall) and since the vertical boards were not necessarily nailed into studs, the caulk helps to keep the boards stuck to the wall. We also put enough caulk on so that it would squish out the sides when we nailed it to the wall so we would have less caulking to do before painting to hide inevitable cracks/spacing issues.

Here’s what it looked like once Dad painted each board the first time. Pretty sweet, huh?

unpainted board and batten

Since the headboard of the bed going in here is about 4′ 6″ tall, we wanted the board and batten to go a bit higher up the wall, so it’s about eye-level with me, 2/3rds of the way up.  This will also help the dark ceiling and wall color from making the room feel cave-like since so much of the room will actually be a crisp white.

Mom also wanted to be able to put pictures and artwork up on the ledge at the top of the board and batten, so Dad made it a little wider (2ish inches total) than is typical to accommodate her. What a guy. It looks like it sticks out pretty far in this picture, but it isn’t at all evident in person. It’ll be great for layering pictures on in a way that can be easily switched out if Mom changes her mind, and it will be really nice not to have to pound too many holes in the plaster walls.

board and batten with ledge

And, through the magical timelines of the internet, here’s a peek at what it will look like all finished. We put two coats of white paint on the previously tan crown molding but still have  a few touch-ups to do. And we need to give the board and batten another coat of white before it’s actually finished (you can see uneven spots in the gloss of the paint in the picture). But it looks pretty good now, no?

painted board and batten

I’m pretty excited about how it looks, but I’m even more excited that I didn’t shoot my eye out while nail-gunning. And Mom is pleased, so that’s always a good thing.

Next on the list: tackling the flooring. That carpet has got to go.

17 Comments

Please validate me by leaving a comment.